Speed limit and speed camera warnings from Road Sign Information*
There are subfunctions for Road Sign Information that can alert the driver if the speed limit has been exceeded or if there are speed cameras nearby1.
The function is available in certain markets.
Speed limit warning
The symbol2 in the instrument panel will flash when the speed limit is exceeded by 5 km/h(3 mph).
The warning will be repeated once after about 30 seconds if the speed is not reduced.
After this, new warnings will only be provided if the speed is reduced by at least 5 km/h(3 mph) under the speed limit and then exceeded again. A new warning may also be provided if the vehicle enters a new speed limit zone.
The driver can be alerted if the vehicle is exceeding a detected speed limit and is approaching a speed camera.1
Speed camera warning
Vehicles equipped with Road Sign Information and map data1 can provide information about upcoming speed cameras in the instrument panel, provided that the navigation map for the relevant area contains information on speed cameras.