Customized supportGet relevant information to your specific car.

Displaying trip computer information

The trip computer registers and calculates information such as distance driven, fuel consumption and average speed. This information is displayed in the instrument panel.

P5-1519-XC90 Hybrid-show Hybrid drive mode in DIM
P5-1507–I+C–App menu and right steering wheel switch
Use the right-side steering wheel keypad to navigate in the trip computer
  1. P5-Icon red circle 1Open/close the app menu
  2. P5-Icon red circle 2Left/right arrow keys
  3. P5-Icon red circle 3Up/down arrow keys
  4. P5-Icon red circle 4Confirm

  1. Press (1) to open the app menu in the instrument panel.

    The app menu cannot be opened if there is an a message in the instrument panel that has not been confirmed. Press (4) to confirm.

  2. The top four lines show readings from trip odometer TM. The following four lines show readings from trip odometer TA. Scroll up/down in the list using (3).

  3. Scroll to the selection buttons in the lines below TA and select the trip odometer to be displayed.

    • Current fuel consumption
    • Distance to empty
    • Odometer
    • Trip odometers TM, TA or none
    • Tourist (alternative speedometer).

    Select or deselect an alternative using the center button (4). The change will be made immediately.

Resetting a trip odometer

P5-1507-reset button left stalk on steering wheel

Reset trip odometer TM by pressing and holding the RESET button the left-side steering wheel lever. Trip odometer TA resets automatically if the ignition is switched off for more than 4 hours.

Changing the unit of measure

Change the units of measure for driven distance and fuel consumption in the center display's Top view by selecting Settings→System→Units and marking the desired unit.

Note

Changing these units of measure will also change the ones used in the Volvo navigation system*.

Did this help?