Replacing windscreen wiper blades

The wiper blades sweep water away from the windscreen. Together with washer fluid, they aim to clean the windscreen and ensure visibility while driving. The wiper blades can be replaced.

P5-1717-XC60+XC60 Hybrid-Change wiperblades windscreen
Make sure that the windscreen wipers are in service position and fold up the wiper arms. Service position is activated/deactivated via the centre display when the car is stationary and the windscreen wipers are not switched on.
P5-Icon red circle 1

Set the wiper blade in removal position by angling it out from the arm until a click sound can be heard.

P5-Icon red circle 2

Press and hold the lock button located on the wiper blade mounting.

P5-Icon red circle 3

At the same time, pull the blade straight out parallel with the wiper arm.

Slide in the new wiper blade until the lock button engages.
Angle the blade in towards the arm until a click sound is heard. The blade is then no longer in the removal position and can be moved again.
Check that the wiper blade is firmly installed.
Fold the wiper arm back towards the windscreen.

 Important

If the wiper arms in service position have been folded up from the windscreen, they must be folded back down onto the windscreen before the activation of wiping, washing or the rain sensor, as well as before driving. This is to avoid scraping the paint on the bonnet.

The wiper blades are different lengths

P5-1507-Wiper blades diffrent length

 Note

When replacing the wiper blades, note that they have different lengths. The blade on the driver's side is longer than on the passenger side.