Park assist camera - settings

The parking camera is an assist system and is activated when reverse gear is engaged.

Settings

To change the settings for the parking camera:

  1. Press OK/MENU when a camera view is shown.
  2. Turn to reach the desired option with OK/MENU.
  3. Press OK/MENU and back out with EXIT.

or

  1. Press CAM.
  2. Press OK/MENU.
  3. Turn to reach the desired option with OK/MENU.
  4. Press OK/MENU and back out with EXIT.

Miscellaneous

The default setting is that the camera is activated when reverse gear is engaged.

  • One press on CAM activates the camera even if reverse gear is not engaged.
  • Change between normal and zoomed image by turning TUNE or by pressing CAM.

Towbar

The camera can be used to advantage when hitching a trailer. A park assist line for the towbar's intended "trajectory" toward the trailer can be shown on the screen - just as for the "wheel tracks".

  • If precise manoeuvring is required then the towbar can be zoomed in by pressing CAM - pressing the button again returns to normal view.

The towbar's park assist line is activated in the menu system after pressing OK/MENU where you can select to display either the "wheel tracks" or the towbar's trajectory - both options cannot be shown simultaneously.