Brake when stationary

Brake when stationary (Hold) means that the driver can release the brake pedal while maintaining braking when the car has stopped at traffic lights, for example.

Activating brake when stationary (Hold)

The function is activated automatically when stationary if gear position D or R is selected and
  • One Pedal Drive is activated
  • the car is at risk of starting to move.
or
  • One Pedal Drive is deactivated
  • the car is already stationary and the brake pedal fully depressed before being released.

Deactivating brake when stationary (Hold)

The function is released when the driver drives off with a gear selected and the accelerator pedal depressed.

 Note

Braking when stationary is also deactivated when the driver changes to neutral position.
The parking brake is activated automatically
  • if the car is switched off.
  • when the driver unbuckles the seatbelt and/or opens the driver's door.
  • if the function is activate and the car has been stationary for a while (approx. 5–10 minutes).

Brake when stationary (Hold) can also change over to the parking brake in other situations.

Symbols in the driver display

SymbolSpecification
P5P6-2037-iCup-Hold function symbol
The symbol is illuminated when brake when stationary (Hold) is activated and holds the car stationary. Note that brake when stationary (Hold) can be activated without the symbol being lit.
P5P6-2037-iCup-Parking brake warning symbol
The symbol is illuminated when the function uses the parking brake to keep the car stationary.