Customised supportGet relevant information to your specific car.

Replacing the dipped beam bulb

The dipped beam bulb in the halogen headlamp can be replaced without assistance from a workshop.

Important

Never touch the glass part of the bulbs with your fingers. Grease from your fingers is vaporised by the heat, coating the reflector and then causing damage.
P5-1717-V426-Low beam bulb replacement
Left-hand headlamp.
  1. Detach the headlamp's round rubber cover.
  2. Unplug the connector from the bulb.
  3. Detach the bulb by pushing it gently upwards and pulling it straight out.
  4. Fit a new bulb in the socket. The bulb's guide pin must be aimed straight upwards.
  5. Press in the connector.
  6. Refit the headlamp's round rubber cover.

Did this help?