Reset sequence for pinch protection
If a problem occurs with the electrical functions for the electric windows, a reset sequence can be tested.
Electrically-operated sun blinds* have a reset sequence that can be tested if necessary.
Warning
If the starter battery is disconnected, the automatic opening and closing function must be reset to work properly. A reset must take place for pinch protection to work.
In the event of problems with the sunroof, contact a workshop[1].
Reset the power window
- Start with the window in closed position.
- Then operate the controls in the manual position 3 times upwards to closed position.The system is initialised automatically.
If problems persist, contact a workshop.
Reset sun blind*
- Start with the sun blind retracted.
- Press the control against retracting mode for approx. 15 seconds.The system is initialised automatically.