Start and switch off preconditioning
Preconditioning heats or cools the passenger compartment, if possible, prior to driving. The function can use direct start from the centre display or a mobile phone.
Start and switch off from car
Press Preconditioning.
Note
Preconditioning is only available when the car is connected to an electrical socket.1 A charging station that is not constantly active, due to a timer, may result in pre-conditioning failure.
If the car is not connected to an electrical socket, it is still possible to cool the passenger compartment briefly in a warm climate by starting preconditioning directly.
Note
Warning
Do not use preconditioning2:
- In unventilated spaces indoors. Exhaust gases are emitted if the heater starts.
- In locations with combustible or flammable material nearby. Fuel, gas, long grass, sawdust, etc. may ignite.
- When there is a risk that the heater’s exhaust line may be blocked. For example, deep snow under the front part of the car can obstruct the heater’s ventilation.
Remember that the preconditioning can be started by a timer that has been set for a long time in advance.
Starting from the app
Starting the pre-conditioning, as well as information on selected settings, can be managed from a device that has the Volvo On Call* app. Preconditioning heats or cools the compartment (with the car's air conditioning) until a comfortable temperature is reached.
The passenger compartment can also be preconditioned with the car remote start function (Engine Remote Start - ERS)3 via the Volvo On Call* app.