It is possible to use an SD memory card with the Sensus Connected Touch option. This article describes how to use an SD memory card.
Using an SD memory card
It is possible to use an SD memory card with Sensus Connected Touch. The card slot can be found in the device that is located in the glove compartment.
Memory and saving information
It is possible to use an SD memory card with memory up to 32 GB. Note that if you have the iGo application then this app is stored on the SD memory card.
It is possible to both read and save information on an SD memory card. If you use a USB memory for Sensus Connected Touch, it is not possible to save information on it. USB memory can only be used to read information.
Removing the SD memory card
To remove an SD memory card, follow the instructions below:
Go to Settings in the app launcher.
Select Advanced settings and then Storage.
Select Unmount the SD card and press OK.
Removing the write protection from the SD memory card
To remove the write protection from an SD memory card, follow the instructions below:
Remove the memory card by following the instructions under the heading 'Removing the SD memory card'.
There is a small switch on the SD card. Adjust the switch to the write position, and then reinsert the card in Sensus Connected Touch.