Fitting and removing safety grilles*
The safety grille is crash-tested in accordance with the ECE R17 legal requirement and fulfils Volvo's strength requirements.
![P5-1646-V90-steel safety grille overview](https://www.volvocars.com/images/support/img49a2977fb8c21435c0a801522f17f75f_1_--_--_VOICEpnghigh.png?imwidth=1600)
For safety reasons, the safety grille must always be attached and anchored correctly.
Warning
Installation
Important
![P5-1646-V90-safety grill attachment](https://www.volvocars.com/images/support/imgec5ce060b8944d80c0a80152723c9ef2_1_--_--_VOICEpnghigh.png?imwidth=1600)
Position the safety grille's brackets on the roof mountings.
The next step is facilitated if two people hold the safety grille in the right position.
![P5-1646-V90-safety grill attachment step 2](https://www.volvocars.com/images/support/imgf6588f83b8a69a60c0a8015273bfa4c0_1_--_--_VOICEpnghigh.png?imwidth=1600)
Insert the supplied screw and tighten using the supplied 6 mm Allen key. Repeat on the other side. Recommended tightening torque: 20 Nm (15 foot-pounds).
For more information about the tools required and methods for fitting/removal, see the installation instructions1 that were included with the initial purchase.