Trip computer - trip statistics*

Information is stored about completed trips containing average fuel consumption and average speed, which can be viewed in the centre console's screen as a bar chart.

Function

P4-1220-Trip statistics
Trip statistics1.

Each bar symbolises 1 km or 10 km driven distance, depending on the scale selected - the bar at the far right shows the value for the current kilometre or 10 km.

Using the TUNE control, the scale for the bars can be changed between 1 km and 10 km - the cursor on the far right changes position between up and down in relation to the scale selected.

Operation

Different settings can be made in the menu system MY CAR. For a description of the menu system, see MY CAR

  • Start new trip - ENTER is used to delete all previous statistics, go back out of the menu by selecting EXIT.
  • Reset for every driving cycle - check the box by selecting ENTER and go back out of the menu by selecting EXIT.

With the "Reset for every driving cycle" option checked, all statistics are deleted automatically once driving is complete and the car has been stopped for 4 hours. Trip statistics start again from zero the next time the engine is started.

If a new driving cycle is started before 4 hours have elapsed then the current period must first be deleted manually using the "Start new trip" option.

See also information on Eco guide.

  1. * Option/accessory.
  2. 1 The figure is schematic - layout may vary depending on car model or updated software.