Controls for windows, glass and mirrors

Operating the panorama roof*

Updated 7/23/2018

When operating with the control in the roof, the panoramic roof is first opened horizontally to a comfort position.

In ventilation position, the front glass cover in the roof is raised at the rear.

Warning

Children, other passengers or objects may be trapped by the panorama roof's moving parts.

  • Always operate the panorama roof with caution.
  • Do not allow children to play with the controls.
  • Remember to always switch off the power supply to the panorama roof by setting the car's electrical system in ignition position 0, and then take the remote control key with you when leaving the car.

Important

Do not open the panorama roof when load carriers are fitted.

In order that the panoramic roof and sun blind can be operated, the car's electrical system must be in at least ignition position I.

Operating with the control in the roof

P5-1617-Panorama roof - switch
Opening, manual
Opening, automatic
Closing, manual
Closing, automatic

Manual operation

To open the sun blind - press the control backwards to the position for manual opening. The sun blind moves towards maximum opening position for as long as the control is held depressed rearward.

Open the panorama roof - press the control backwards a second time to the position for manual opening. The panoramic roof first reaches comfort positionComfort position is an open position for the glass cover, where wind noise and resonance noise are at a comfortably low level while driving.. In order to open to maximum opening position - press the control backwards a third time.

Close the roof/blind by repeating the preceding procedure in reverse order - press the control forward/downward to the manual closing position instead.

The movement of the roof is stopped if the control is released or when the glass reaches the comfort position or the maximum opening or closing position.

Note

For manual opening, the sun blind must be fully open before the panoramic roof can be opened. When the procedure is reversed, the panoramic roof must be fully closed before the sun blind can be closed.

Automatic operation

Open the sun blind to maximum position - press the control backward to the position for automatic opening and release.

To open the panorama roof, press the control backwards a second time to the position for automatic opening and release. The panoramic roof first reaches comfort positionComfort position is an open position for the glass cover, where wind noise and resonance noise are at a comfortably low level while driving.. To open to the maximum opening position - press the control a third time backward to the position for automatic opening and release.

Close the roof/blind by repeating the preceding procedure in reverse order - press the control forward/downward to the automatic closing position instead.

The movement of the roof is stopped when the glass reaches the comfort position or the maximum opening or closing position. The movement is also stopped if the control is operated again in the opposite direction to the direction of movement in progress.

The movement of the roof is not stopped when the glass reaches the comfort position when closing from maximum opening position.

Automatic operation - rapid opening/closing

The panorama roof and sun blind can be opened/closed simultaneously:

To open - press the control rearward to the automatic operation position twice and release.

To close - press the control forward/downward to the automatic operation position twice and release.

The movement of the roof is stopped when the glass reaches the comfort position or the closing position. The movement is also stopped if the control is operated again in the opposite direction to the direction of movement in progress.

The movement of the roof is not stopped when the glass reaches the comfort position when closing from maximum opening position. The movement of the blind is never stopped when the roof reaches comfort position.

Ventilation position

P5-1507-Tilt opening/closing roof

Ventilation position, vertically at the rear edge.

Open by pressing the control upward.
Close by pressing the control forward/downward.

When the ventilation position is selected the front glass cover is raised at its rear edge. If the sun blind is fully closed when ventilation position is selected, then it opens automatically approx. 50 mm.

Automatic closing of the sun blind

When the car is parked in sunny/hot weather, the sun blind closes automatically 15 minutes after the car is locked. This is in order to lower the passenger compartment temperature and protect the car upholstery from being bleached by the sun.

The function is deactivated when the car is supplied from the factory and can be activated/deactivated:

Press Settings in the top view in the centre display.

Press My CarLocking.

Select Auto Close Sun Curtain to activate/deactivate.

Closing using the remote control key, central locking button or door handles

Remote control key

Give a long press on the remote control key's lock button until the panorama roof and sun blind start moving towards the closed position. Then release the lock button.

Movement stops if the remote control key's lock button is pressed again or when the roof/blind has reached the closed position.

Central locking button

P5-1507 Central locking front door

Central locking button.

When the car's electrical system is set in at least ignition position I, the central locking button in the driver's door or passenger door* can be used to close the panoramic roof.

Give a long press on the central locking button until the panorama roof and sun blind start moving towards the closed position. Then release the button.

Movement stops if the central locking button is pressed again or when the roof/blind has reached the closed position.

Door handle

Cars equipped with keyless locking/unlocking* have a touch-sensitive recess on the outer part of the outside door handle.

Place your finger against the touch-sensitive recess on the outside of one of the door handles until the panorama roof and sun blind start moving towards the closed position. Then remove your finger from door handle's recess.

Movement stops if you place your finger against the door handle recess again or once the roof/blind has reached the closed position.

Warning

If the panorama roof is closed with the remote control key, the central locking button or door handle, check that no one risks being trapped.

Important

Check that the panoramic roof is properly closed when closing.

Pinch protection

The panorama roof has pinch protection that is triggered if the glass cover or the sun blind is blocked by an object during closing. In the event of blocking, the glass cover or sun blind stops and is then opened automatically to approx. 50 mm from the blocked position (or to full ventilation position). The pinch protection is also active when the glass cover or sun blind is opened.

If the pinch protection has deployed then it is still possible to operate the glass cover and/or sun blind once more in the same direction without pinch protection, if this is done within 10 seconds after pinch protection deployment. It is therefore possible to override the pinch protection when closing has been interrupted e.g. if ice has formed around the glass cover, by continually pressing the control forward/downward until the glass cover and/or sun blind is closed.


Did this help?