Important
The driver is always responsible for ensuring that the vehicle is driven while using a lighting mode that is suitable for the current driving conditions and local traffic regulations.
Exterior lighting
You can choose between several different exterior lighting modes by rotating the ring on the left-hand steering wheel stalk.
 | Auto | Automatic lights mode1 allows your vehicle to automatically detect and calculate which lighting mode is most suitable depending on the lighting conditions. |
 | Passing beam | You can manually select the passing beam to keep the front lights dipped. |
 | Parking lights | The position lights are points of illumination around the vehicle that make it more visible to other road users. |
 | Off | 0 deactivates all lighting modes.2 |
 | Automatic high beam | Automatic high beam allows the high beam to automatically react to traffic ahead.3 |
Note
Daytime running lights
If you are in automatic lights mode, you can deactivate the daytime running lights via the center display. However, it is strongly recommended to keep them on while driving.
Additional lights
You can control the high beam and the turn signals with the left-hand steering wheel stalk.
The hazard warning flasher helps you to warn others of potential risks. You can turn them on or off by pressing the button below the center display.
There are additional lights that can be enabled or adjusted, such as:
| Rear fog light | The rear fog light warns traffic behind you of your presence in poor visibility conditions. You activate it via the button on the left-hand steering wheel stalk. |
| Front fog lights | The front fog lights warn traffic of your presence in poor light conditions. You can activate them using the button on the left-hand steering wheel stalk. |
