Controlling the front wipers
You can manually activate the windshield wipers, select a wiper mode, or enable the wipers to start automatically when it rains.
There are different front wiper modes that you can activate by using the right-hand stalk. The modes are:
 | High speed |
 | Normal speed |
 | Interval wipe |
 | Wipers are turned off |
 | Single sweep |
Single sweep
- Press the stalk downward and release.
Selecting wiper mode
- Press the stalk upward or downward.
Activating rain sensor
- Select mode 0 and press the rain sensor button
.
Adjusting rain sensor sensitivity or interval wipe frequency
- Rotate the scroll wheel at the end of the stalk.
Tip
Activate when reversing
If the front wipers are active, the rear wiper will automatically activate when reverse gear is selected. It automatically turns off when you change gear. The rear wiper will not activate in low temperatures.