| The indicator for charging current (1) is extinguished. The car symbol (4) illuminates with a constant green glow. | Standby | - The charging cable is connected to the car.
- Charging is possible but has not yet been activated by the electronics in the car.
| Wait until the battery is fully charged. |
| Existing charge current is shown by a green indicator (1). The car symbol (4) illuminates with a constant green glow. | Charging in progress. | - The car's electronics have started charging.
| Wait until the battery is fully charged. |
| The indicator for charging current (1) is extinguished. The car symbol (4) flashes red. | Charging is not possible. | - There is a communication error between the control unit and the car.
- The ventilation for the car's electronics is not adequate, not activated or defective.
| - Check all connections or use another 230 V socket (alternating current).
- Restart the battery charging.
|
| The car symbol (4) illuminates with a constant red glow. | Charging is not possible. | - The ground fault breaker on the charging cable has triggered.
| - Unplug the charging cable from the 230 V socket.
- The ground fault breaker is reset and the unit restarts.
- If the problem persists - consult a qualified professional
|
| The indicator for charging current (1) and the house symbol (2) flash red. | Charging is not possible. | Temperature monitoring has triggered for the 230 V socket. | Restart charging. If the problem persists - consult a qualified professional. |
