Driving lights
Driving lights mix automatic behaviours and direct controls which allow you to adapt to any situation or visibility conditions.
The driver is always responsible for ensuring that the car is driven while using a lights mode that is suitable for the current driving conditions and local traffic regulations.Important
Exterior lighting
 | Auto | The automatic lights mode[1] allows your car to automatically detect and calculate which lighting mode is most suitable depending on the lighting conditions. |
 | Passing beam | You can manually select the passing beam to keep the front lights dipped. |
 | Position lights | The position lights are points of illumination around the car that make your car more visible to other road users. |
 | Off | 0 deactivates all lighting modes.[2] |
 | Automatic high beam | Automatic high beam allows the high beam to automatically react to traffic ahead.[3] |
Note
Passing beam
The passing beam will automatically turn on if you have the position lights or Off selected and drive at speeds above 15km/h. If you are driving at lower speeds and want to select the position lights or Off lighting mode, you will need to confirm your selection via the centre display.
Additional lights
You can control the high beam and the direction indicators with the left-hand steering wheel stalk.
The hazard warning lights help you to warn others of potential risks. You can turn them on or off by pressing the button below the centre display.
| Rear fog light | The rear fog light warns traffic behind you of your presence in poor light conditions. You activate it via the button on the left-hand steering wheel stalk. |
|---|---|
| Trailer light check | You can run tests from the centre display to check the lights on a connected trailer. |
| Adapt lights for left-hand traffic | If you are travelling to a region which drives on the opposite side of the road to your own, you can change the orientation of the lights to avoid blinding other drivers. |
| Adapt lights for right-hand traffic | If you are travelling to a region which drives on the opposite side of the road to your own, you can change the orientation of the lights to avoid blinding other drivers. |
Auto-levelling
Auto-levelling automatically adjusts the vertical alignment of the passing beam to maintain good visibility and avoid dazzling other road users.
